sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| # | 參數 | 組織 | 參數值 |
|---|---|---|---|
| 1 | F.A.D/最大壓強 | M3 | 47/0.8 |
| Min | 38.5/1.0 | ||
| MPa | 32.8/1.2 | ||
| 2 | 環境溫度 | °C | -5°C ~ +45°C |
| 3 | 冷卻管道 | Air-Cooling | |
| 4 | 排氣溫度 | °C | Ambient Temperature + 15°C |
| 5 | 潤滑油 | 昇 | 138 |
| 6 | 譟音 | Db | 84±2 |
| 7 | 驅動管道 | Direct Drive | |
| 8 | 電壓 | 380V/50Hz/3Ph | |
| 9 | 功耗 | KW | 220 |
| 10 | 啟動管道 | Variable Frequency Start | |
| 11 | 外形尺寸n | L (mm) | 3630 |
| W (mm) | 2160 | ||
| H (mm) | 2310 | ||
| 12 | 淨重 | kg | 5100 |
| 13 | 輸出管徑 | 英寸 | DN100 |
橡塑企業要聞
The Chairman of YuFa Group Mr. Cai Shared His Opinion of a Custom Made Injection Molding Machine in the Production of Home Living Products
Arburg stellt 2012 ein IML-System mit 2 Kavitäten und 1-Liter-Eimer und Griffmontage aus.
Ningbo LK Technology Co., ltd. Inhouse Testing Their New Forza Two-platen Injection Molding Machine with IML Solutions
NPE 2024, ChenHsong Machinery zeigt schlüsselfertige IML-Lösungen
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
IML Solutions Released New IML Robots for Stack Mold 2 Lids + 2 Boxes
Fakuma 2023 – Sehen Sie, was Spetztekhosnastka Ltd., der Aussteller der Fakuma aus der Ukraine, erwartet
Arge Top Entry IML Robot With Pails Dropped Freely
Haida Finished the Injection Cycle of 26s in An IML Production of A 33L Paint Bucket with Its HD700U & SWITEK IML Robot SW850
ChenHsong on Show Crystal Plate Injection Production Solution at ArabPlast 2025 by JM168
聯系博主
sales06@switek.biz
+86 186 5927 5869
中國廣東省東莞市
注塑自動化解決方案
