sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| # | 參數 | 組織 | 參數值 |
|---|---|---|---|
| 1 | F.A.D/最大壓強 | M3 | 6.3/0.8 |
| Min | 5.6/1.0 | ||
| MPa | 4.5/1.2 | ||
| 2 | 環境溫度 | °C | -5°C ~ +45°C |
| 3 | 冷卻管道 | Air - Cooling | |
| 4 | 排氣溫度 | °C | Ambient Temperature + 15°C |
| 5 | 潤滑油 | 昇 | 22 |
| 6 | 譟音 | Db | 72±2 |
| 7 | 驅動管道 | Permanent Magnet Synchronous | |
| 8 | 電壓 | 380V/50Hz/3Ph | |
| 9 | 功耗 | KW | 37 |
| 10 | 啟動管道 | Variable Frequency Start | |
| 11 | 外形尺寸n | L (mm) | 1440 |
| W (mm) | 980 | ||
| H (mm) | 1540 | ||
| 12 | 淨重 | kg | 505 |
| 13 | 輸出管徑 | 英寸 | Rp1-1/2 |
橡塑企業要聞
Fakuma 2023 - LK IMM in mostra Serov e tutte le macchine per stampaggio a iniezione elettriche
K-Fair 2022, FANUC on Show Turn-key Bio Plastics Injection Solutions
Demag On Show rPET IML Solutions at PlastImagen 2025 with StackTeck in Mexico
SWITEK Automation 3 axis servo injection robot 16 Cavities elbow PVC pipe fittings runner cutting system put in production.
Sumitomo (SHI) Demag Demonstrated Their New Hybrid Injection Molding Machine EL-Exis SP 250-920 with a Fast Cycle IML Production
Inbetriebnahme des neuen 4-Kavitäten-Burger-King-Twin-Cups-Side-Entry-IML-Systems von SWITEK
KF300-S8 By Powerjet Machinery Started Up With an 8 Cavities Disposable Cups
Milacron Showcased Co-Injection Technology of 2 Cavities 20L IML Pails at NPE 2024
Sumitomo (SHI) Demag Showcased 1.8 Seconds IML Solutions with Their New El-Exis SP 200-920 Hybrid Injection Molding Machine
Fakuma 2023 -- ENGEL presenta la sua macchina per lo stampaggio a iniezione completamente elettrica con soluzioni IML chiavi in mano
聯系博主
sales06@switek.biz
+86 186 5927 5869
中國廣東省東莞市
注塑自動化解決方案
