sales06@switek.biz
+86 186 5927 5869
Project Details
| # | Name | Value |
|---|---|---|
| 1 | Product Name | IMLCups |
| 2 | Material | PP |
| 3 | Mould Cavities | 6 |
| 4 | Cycle Time | 8.5 |
| 5 | IML Robot | SW833-19 |
| 6 | IMM | 380 Ton |
| # | Name | Value |
|---|---|---|
| 1 | In Mould Time | 0.8~3 s |
| 2 | Dry Cycle Time | 2 s |
| 3 | Power | 6.2 (KVA) |
| 4 | Input Power | AC220V/3P |
| 5 | Working Pressure | 5~7 |
| 6 | Air Consumption | 10(NL/Cycle) |
| 7 | Net Weight | 900 kg |
| 8 | Gross Weight | 1500 kg |
| # | Name | Value |
|---|---|---|
| 1 | X1 | 190 mm |
| 2 | X2 | 190 mm |
| 3 | Y | 400 mm |
| 4 | Z | 2100 mm |
| 5 | L | 2730 mm |
| 6 | W | 2410 mm |
| 7 | A | 1280 mm |
| 8 | B | 2260 mm |
| 9 | H | 1720 mm |
IML Video
Why it's not recommended to have an IML solution with more than 4 cavities for containers which request a wrap+bottom labeling?
For an IML container which request a wrap + bottom labeling will need 2 labels and request a reverse injection technology. With two labels means that there would be 2 sets of magazines and mandrel to stock and pick the labels for the containers. A four cavities design of the mold there would be sufficient space in the IML robot to fit in the extra magazines, but for more cavities mold design the size of the magazine will exceed the limit of the IML robot and will reduce the efficiency of the robot. It would not be an ideal solutions for Wrap + Bottom IML Solutions
