sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| # | Parameters | Unit | Value |
|---|---|---|---|
| 1 | F.A.D/Max Pressure | M3 | 3.0/0.8 |
| Min | 2.7/1.0 | ||
| MPa | 2.1/1.2 | ||
| 2 | Ambient Temperature | °C | -5°C ~ + 45°C |
| 3 | Cooling Mode | Air - Cooling | |
| 4 | Discharge Temperature | °C | Ambient Temperature + 15°C |
| 5 | Lubricant Oil | Liter | 16 |
| 6 | Noise | Db | 66±2 |
| 7 | Driven Mode | Permanent Magnet Synchronous | |
| 8 | Voltage | 380V/50Hz/3Ph | |
| 9 | Power | KW | 18.5 |
| 10 | Start Mode | Variable Frequency Start | |
| 11 | Dimension | L (mm) | 1300 |
| W (mm) | 930 | ||
| H (mm) | 1360 | ||
| 12 | Net Weight | kg | 291 |
| 13 | Outlet Pipe Diameter | Inch | Rp1 |
INJECTION MACHINERY NEWS
India Customer is Testing Their New IML System of 2 Cavities 1L Bucket
SWITEK Finished the In House Testing of Juice Extractor Cover Top Entry IML System
SWITEK New 4 cavities rectangular box with temper evidence side entry 5 faces IML solutions finished the in house testing before delivery.
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
SW7112DS - The Best Buy High Speed Injection Robot for Thin-wall Containers
SWITEK New IML System for 6 Cavities Cups with Metallic Label is Ready for Bulk Production
SWITEK Automation Started Up Its Dual Heads Pipe Fittings In Mold Insertion System Custom Made for LESSO Group
SWITEK Automation New Icecream Cups Lids Auto-production Put in Use
SWITEK New IML Robot for Multi-Cavities Containers is Under Going In House Testing
SWITEK New 12 Cavities Take Away Cups Lids Cover Pressing System Started Up for Production
Contact Blogger
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
