Hwamda new turn-key snack box production system with packing started up with two high speed injection molding machine and Shini Robot

sales06@switek.biz

+86 186 5927 5869

Hwamda new turn-key snack box production system with packing started up with two high speed injection molding machine and Shini Robot

New turn-key snack box + lids packing system started up with Hwamda hgih speed hydraulic injection molding machine and Shini injection robot and have the stacked snack boxs and lids picked by scara robot.

This is a typical injection automation application with two injection molding machines and robots, one injection molding machine/robot sets to produce the box and the other sets of injection molding machine/robot sets for lids with a SCARA robot as the transfer unit. The advantage of this solutions is it's simple and efficient for a small budget project.

To upgrade this system an optical vision control unit can be added to both side after the box and lids picked out from the injection molding machine to make sure that all the box and lids are quality products. Also for special requirem say snack box to be sold in supermarket a sticker labeling unit can be added to the system also.

YOU MAY ALSO BE INTERESTED

SW6712 is an injection robot with a payload up to 8 kg for injection molding machine 350 ~ 650 Ton

SW6310D-20 is an injection robot with a payload up to 3 kg for injection molding machine 150 ~ 350 Ton

SW6712S is an injection robot with a payload up to 8 kg for injection molding machine 350 ~ 650 Ton

SW6712DS-20 is an injection robot with a payload up to 8 kg for injection molding machine 200 ~ 550 Ton

SW6308S-20 is an injection robot with a payload up to 3 kg for injection molding machine 50 ~ 250 Ton

ข่าวเครื่องจักรฉีด

สอบถามรายละเอียดเพิ่มเติมตอนนี้

อีเมล / whatsapp / wechat

รายละเอียดความต้องการของคุณ

Submit

WeChat

E-mail: sales@switek.biz

ติดต่อบล็อกเกอร์

sales06@switek.biz

+86 186 5927 5869

DongGuan, GuangDong, China

หุ่นยนต์ฉีด

โซลูชั่นระบบอัตโนมัติ

เครื่องจักรเสริม