Panasonic A6 Servo Motor and Driver Instruction — List of Parameters/[Class 3] Verocity/Torque/Full-closed control

Abstract

The correct setup of the parameter and mode of the Panasonic A6 series of servo will ensure the proper working of the Panasonic A6 series of motor and the stability of your machineries and automation system.

Parameter No.		Title	Range	Default			Unit	Turning on of power supply	Related Control Mode				Detail page
Class	No.			A,B-frame	C-frame	D,E,F-frame			P	S	T	F
3	00	Speed setup, Internal/External switching	0 to 3	0			—			○			4-31
3	01	Speed command rotational direction selection	0 to 1	0			—			○
3	02	Input gain of speed command	10 to 2000	500			(r/min)/V			○	○		4-32
3	03	Reversal of speed command input	0 to 1	1			—			○
3	04	1st speed of speed setup	-20000 to 20000	0			r/min			○			4-33
3	05	2nd speed of speed setup	-20000 to 20000	0			r/min			○
3	06	3rd speed of speed setup	-20000 to 20000	0			r/min			○
3	07	4th speed of speed setup	-20000 to 20000	0			r/min			○
3	08	5th speed of speed setup	-20000 to 20000	0			r/min			○
3	09	6th speed of speed setup	-20000 to 20000	0			r/min			○
3	10	7th speed of speed setup	-20000 to 20000	0			r/min			○
3	11	8th speed of speed setup	-20000 to 20000	0			r/min			○
3	12	Aacceleration time setup	0 to 10000	0			ms/(1000 r/min)			○
3	13	Deceleration time setup	0 to 10000	0			ms/(1000 r/min)			○
3	14	Sigmoid acceleration/deceleration time setup	0 to 1000	0			ms			○			4-34
3	15	Speed zero-clamp function selection	0 to 3	0			r/min			○
3	16	Speed zero clamp level	10 to 20000	30			r/min			○	○
3	17	Selection of torque command	0 to 2	0			—				○		4-35
3	18	Torque command direction selection	0 to 1	0			—				○
3	19	Input gain of torque command	10 to 1000	30			0.1V/100%*				○
3	20	Input reversal of torque command	0 to 1	0			—				○		4-36
3	21	Speed limit value 1	0 to 20000	0			r/min				○
3	22	Speed limit value 2	0 to 20000	0			r/min				○
3	23	External scale selection	0 to 6	0			—	○				○	4-37
3	24	Numberator of external scale division	0 to 223	0			—	○				○
3	25	Denominator of external scale division	1 to 223	10000			—	○				○
3	26	Reversal of direction of external scale	0 to 3	0			—	○				○	4-38
3	27	External scale Z phase disconnection detection disable	0 to 1	0			—	○				○
3	28	Hybrid deviation excess setup	1 to 227	16000			Command unit	○				○
3	29	Hybrid deviation clear setup	0 to 100	0			Revolution	○				○

• Partial parameter of standard type and communication type are different type are different from a table in a shipment parameter.
• Definition of symbols under "Power Off/On"-: if a change is made, it will be reflected upon the parameter when the power to the driver is turned off and then on again.
• Definition of symbols under "Related mode"-:P: position control, S: velocity control, T: torque control, F:full closed control

---

Caution → Tye symbol "*" attached to "Unit". indicates that the digits of setting unit will change if the parameter is set by using the setup support software PANATERM.
Note → Parameter describes of this page is P.4-6 to P.4-85.

Functional Units of SWITEK Top Entry Petri Dish Packing System

---

Installation Dimension of SWITEK Side Entry Petri Dish Packing System

---

Productivity of SWITEK Side Entry Petri Dish Packing Solutions

---

Mold Layout Design & Sleeve Size for the Petri Dish Packing System

I think you'll have an overall understanding about the SWITEK top/side entry petri dish packing system. If you still have any other question about it or need any help in your petri dish production project, please feel free to contact SWITEK laboratory consumable plastic parts injection molding solutions team for more information.

---

Email: sales06@switek.biz

---