• 
• Contract SWITEK Laboratory Solutions
• Automation Solutions
  • حلول IML
  • IML Solutions
  • Soluciones IML
  • Soluções IML
  • IML Solutions
  • Solutions IML
  • IMLソリューションズ
  • IML 솔루션
  • Soluzioni IML
  • โซลูชัน IML
  • 模内贴解决方案

14. How to Use the Front Panel — Structure of Each Mode

HIGH SPEED IML ROBOT

Keywords:Panasonic A6 Servo Installation Instruction, Panasonic A6 Driver, Panasonic A6 Series Servo Motor Manual

14. How to Use the Front Panel — Structure of Each Mode

Abstract

The led front panel of the Panasonic A6 servo motor driver will display the running status of the motor and the alarm code if there's an alarm occurred during the running of the system. It's also the interface of Panasonic A6 servo motor to the operator in parameter setting. Here in this chapter you'll have an outlined guide of each mode of the Panasonic A6 series motor driver.

Use each button on the touch panel to select the structure and switch the mode.

---

Note → You can change the flashing decimal point with <, then shift the digit for daga change "."
Caution → On power-up, the monitor mode executed is displayed according to the setup of Pr5.28 LED initial status.

Hybrid Injection Molding Machine for Laboratory Consumable Petri Dish Injection Molding -- HD170LDY-B

HD170LDY-B

HD170LDY -- HaiDa Hybrid Injection Molding Machine

No.	Name	Value
1	Clamping Force	1700 kN
2	Shot Weight	147 g
3	Shot Speed	200 mm/s
4	Screw Diameter	36 mm
5	Opening Stroke	440 mm
6	Space Between Tie Bars	470 x 470 mm
7	Mold Thickness (Min)	200 mm
8	Mold Thickness (Max)	520 mm
9	Pumper Motor	56 kW
10	Heating Capacity	11 kW

Injection Automation Application -- Side Entry Petri Dishs Injection Molding Automation Solution

SIDE ENTRY PETRI DISH PACKING SOLUTION

Introduction of SWITEK Side Entry Petri Dish Packing System

The SWITEK side entry petri dish packing system is a custom made automation system for the stable production of laboratory consumable plastic petri dish with the picking robot, the petri dish assembly, stacking, packing unit etc. integrated as auniformed system for the efficient and stable production of the petri dish. The system can be custome made for a petri dish mold layout design of 2+2, 4+4, 6+6, 8+8 etc.

Functional Units of SWITEK Top Entry Petri Dish Packing System

• (1) -- Side Entry Robotic Arm: The picking arm of the packing system in handling the picking of the petri dish from the injection molding machine and place them on the assembly unit.
• (2) -- Injection Mold: The core injection unit to shape the petri dish, it can be 2+2, 4+4, 6+6, 8+8 configuragion of the petri covers and bottoms.
• (3) -- Petri Dish Assembly Unit: Have the cover and bottom of the petri dish assembled and drop it on the conveyor.
• (4) -- Sorting Conveyor: Lined the assembled petri dish sets for stacking before packing.
• (5) -- Stacking Station: Have the well assembled petri dishes stacked up as requested (5/10/15/20/25 sets etc.).
• (6) -- Petri Dish Packing Unit: Have the well stacked petri dish packed and sealed with optional function of vacuume the bag.
• (7) -- Petri Dish Transfer Robot: Catch the well sealed petri dish bag and drop it to the conveyor.
• (8) -- Petri Dish Dropping Conveyor: Deliver the well packed petri dish.
• (9) -- Injection Molding Machine: The injection unit of the whole syste.

---

Installation Dimension of SWITEK Side Entry Petri Dish Packing System

---

Productivity of SWITEK Side Entry Petri Dish Packing Solutions

Vacuumed Sleeve Packing
• 10 Sets/Bag --Injection Cycle time: 9s
• 20 Sets/Bag --Injection cycle: 6s
• 25 Sets/Bag --Injection Cycle: 5.5s

Non-vacuumed Sleeve Packing
• 10 Sets/Bag --Injection Cycle time: 6.5s
• 20 Sets/Bag --Injection cycle: 6s
• 25 Sets/Bag --Injection Cycle: 5.5s

---

Mold Layout Design & Sleeve Size for the Petri Dish Packing System

Mold Layout Deisgn

Sleeve Size for Package with Vacuum Request

Sleeve Size for Package without Vacuum Request

Sleeve (With Mark) Size for Package with Vacuum Request

Sleeve (With Mark) Size for Package without Vacuum Request

I think you'll have an overall understanding about the SWITEK top/side entry petri dish packing system. If you still have any other question about it or need any help in your petri dish production project, please feel free to contact SWITEK laboratory consumable plastic parts injection molding solutions team for more information.

---