Injection Molding Machine for PVC Pipe Fittings -- YIZUMI UN260A6 Intelligent Energy Saving Servo Injection Molding Machine

Yizumi A6 Energy Saving injection molding machine

Pipe Fittings Injection Automation Solutions

UN260A6 -- Yizumi A6 Series Energy Saving Servo Injection Molding Machine

Why to Choose YIZUMI UN260A6 Energy Saving Servo Injection Molding Machine for the 16 Cavities PVC Pipe Fittings Production?

The UN260A6 is a new generation of energy saving servo injection molding machine produced by Yizumi Machinery with a clamping force of 2600kN targeting the Next-generation of intelligent injection molding. As an intelligent injection molding machine chosen for PVC pipe fittings injection molding, the YIZUMI UN260A6 has the below features:

Intelligence
- Intelligent mold opening
- Intelligent clamping force management system
- Preventive monitoring and maintenance system for key components
- Intelligent energy management system
Precision
- Dual pressure-center platens
- Integral dual-layer support for injection unit
- Proportional valves for mold opening and closing standard for all models
- high-mixing dual-alloy plasticizing components for all models
- Closed-loop oil temperature control
Green
- Low-Inertia electric pre-plasticizing -- electric plasticizing for greater energy saving
- Green plasticizing function -- more energy-saving plasticizing
- Fully enclosed aerogel insulation device
- New energy-eficient hydraulic system
- New generation servo drive with energy recovery
Efficiency
- Parallel electric plasticizing
- Upgraded injection unit for improved efficiency
- Improved dry cycle

The Dimension of Yizumi UN260A6 Intelligent Energy Saving Servo Injection Molding Machine

Yizumi A6 Energy Saving Servo injection molding machine

Unit: mm

The Platen Size of Yizumi UN260A6 Intelligent Energy Saving Servo Injection Molding Machine

Unit: mm

What's New of the 16 Cavities PVC Pipe Fittings Injection Automation Solutions?

Different from the traditional PVC pipe fittings injection molding solutions to have the PVC pipe fittings seperated from the runner with air nippers outside the mold, the new solution is to have a submarine gate mold design of which the PVC pipe fittings would be seperated from the runner immediately after mold opening.

The EOAT of the robotic arms designed for the new solution is also different from the traditional parts clipping but a hopper to collect the pipe fittings ejected and cliper only for the runner picking. The air nipper outside is only for the purpose of cutting the runner samller for a faster recycling of the pipe fittings runners.

With the advancement of the new pipe fittings injection molding technology, SWITEK is providing custom made "Just do it" automation solutions of PVC/PPR pipe fittings injection automation solutions to producers around the world.

All Electric Injection Molding Machine for Petri Dish Recommendation -- ZE4500F/1700C

Zhafir AllElectric Injection Molding Machine

ZE4500F/1700C

ZE4500F/1700-- Zhafir All Electric Haitian High Speed Injection Molding Machine and IML Application

No.	Name	Value
1	Clamping Force	4500 kN
2	Shot Weight	0 g
3	Shot Speed	160 mm/s
4	Screw Diameter	70 mm
5	Opening Stroke	800 mm
6	Space Between Tie Bars	770 x 770 mm
7	Mold Thickness (Min)	400 mm
8	Mold Thickness (Max)	820 mm
9	Pumper Motor	172 kW
10	Heating Capacity	0 kW

SWITEK BLOOD TUBES PACKING SOLUTIONS

About SWITEK Laboratory Consumable Testing Tubes Collecting Solutions

SWITEK laboratory consumable testing tubes collecting solutions is an integrated automation system of the laboratory consumable testing tubes injection molding which include the testing tubes picking robot, testing tubes sorting, collecting and have them loaded in plastic bags for vacuum and packing.

Parameters of SWITEK Testing Tubes Collecting System

Injection Molding Machine: 2500~4000kN High Speed Injection Molding Machine
Mold Layout Design: 32/48/64 Cavities
Injection Cycle Time: 8s
In Mold Time: 2s ±15%
Installation Dimension: 3000mm (L) x 2000mm (W) x 2200mm (H)

SWITEK Laboratory Consumable Testing Tubes Collecting System Functional Units

The detailed functional units of the testing tubes collecting sysstem:

(1) Box Loading Robot: Pick the sorted testing tubes and load them in the box.
(2) Testing Tubes Receiving Arm: Receive the testing tubes from the picking arm (6).
(3) & (5) Box Sliding Conveyor: Have the tubes collecting box moved to the right position to be loaded.
(6) Testing Tubes Picking Arm: To pick the testing tubes from the injection molding machine.
(7) Testing Tubes Collecting Station: The testing tubes receiving robot will drop the testing tubes here to be slided down to be sorted for box loading.
(8) Testing Tubes Sliding Tubes: To protect the testing tubes from scratching in dropping.
(9) Sensors: The sensors to check the availability of the testing tubes.
(10) Conveyor: Conveyor of the sorted testing tubes to be picked by the box loading robot.

To reduce the risk and cost of system purchasing, the best way is to have a turn-key solution of the laboratory consumable testing tubes which we'll ensure that the mold design is friendly to the automation system and maximize the productivity of the system. With a turn-key solutions, SWITEK will have the mold tested with the automation system to ensure that the system delivered is ready to work.