All ELectric Injection Molding Machine for IML Project -- Welltec TTI-300HD

Turn-key IML Solutions

TTI-300HD -- WELLTEC All Electric Injection Molding Machine for IML Buckets

What Kinds of IML Buckets Can be Produced by WELLTEC TTI-300HD All Electric Injection Molding Machine?

The TTI-300HD is an all electric injection molding machine produced by COSMOS MACHINERY with clamping force 30000kN and injection rate up to 885cm³/sec, which is an ideal injection molding machine for the producion of thin-wall containers for diary products like 1L buckets for Yogurt or Icecream etc. As for what kind of IML buckets can be produced by TTI-300HD, let's check the key parameter of it for IML production of a thin-wall container:

Opening Stroke 600mm: It's suitable for the high speed IML production of buckets with height <150mm

Which means that for any IML buckets with heights no more than 150mm could be produced by this injection molding machine.

The Dimension of WELLTEC TTI-300HD All Electric Injection Molding Machine

Unit:mm

A	B	C	D	E	F	G	H	I	J	K
2130	3335	1915	2295	7102	7640	1892	1690	237	946	730

The Dimension of the Platen (mm)

Why is a 2+2 Solutions of IML Recommended for the Producers of 1L Thin-wall Buckets With Handle for Dairy Products?

A 2+2 solutions of IML for 1L buckets means to have 2 cavities of the 1L buckets and 2 cavities of handles integrated in a single mold for an easy solution to have the handle assembled to the buckets to reduce the labour cost. With this IML solution the IML robot will pick both the buckets and the handles from the mold and have the handles assembled to the buckets immediately after the parts pick out and have the IML buckets stacked on the conveyor.

Which IML Robot to be Recommended for the 2+2 IML System?

The custom made SW833-S6 high speed side entry IML robot with handle assembly which design and produced by GuangDong SWITEK Technology Co.,Ltd. is to be recommended. It's an IML robot with integration of IML labeling and the handle assembly unit to proceed the IML labeling and handle assembly automatically.

How is the IML Buckets Produced by a 2+2 IML System?

The video on show how is the IML robot finish the bucket production process of lable picking, inserting, buckets picking handles picking and have the handles assembled to the buckets. The difference between the custom made IML robot SW833-S6 to a regular side entry IML robot is that it has a handle assembly unit to have the handles assembled to the bucket.

All Electric Injection Molding Machine for Petri Dish Recommendation -- EM300-C850H-B

HMD AllElectric Injection Molding Machine

EM300-C850H-B

HMD EM300 -- HWAMDA High Speed All Electric Injection Molding Machine

No.	Name	Value
1	Clamping Force	3000 kN
2	Shot Weight	384 g
3	Shot Speed	164 mm/s
4	Screw Diameter	50 mm
5	Opening Stroke	610 mm
6	Space Between Tie Bars	730 x 730 mm
7	Mold Thickness (Min)	250 mm
8	Mold Thickness (Max)	680 mm
9	Pumper Motor	65 kW
10	Heating Capacity	0 kW

SWITEK BLOOD TUBES PACKING SOLUTIONS

About SWITEK Laboratory Consumable Testing Tubes Collecting Solutions

SWITEK laboratory consumable testing tubes collecting solutions is an integrated automation system of the laboratory consumable testing tubes injection molding which include the testing tubes picking robot, testing tubes sorting, collecting and have them loaded in plastic bags for vacuum and packing.

Parameters of SWITEK Testing Tubes Collecting System

Injection Molding Machine: 2500~4000kN High Speed Injection Molding Machine
Mold Layout Design: 32/48/64 Cavities
Injection Cycle Time: 8s
In Mold Time: 2s ±15%
Installation Dimension: 3000mm (L) x 2000mm (W) x 2200mm (H)

SWITEK Laboratory Consumable Testing Tubes Collecting System Functional Units

The detailed functional units of the testing tubes collecting sysstem:

(1) Box Loading Robot: Pick the sorted testing tubes and load them in the box.
(2) Testing Tubes Receiving Arm: Receive the testing tubes from the picking arm (6).
(3) & (5) Box Sliding Conveyor: Have the tubes collecting box moved to the right position to be loaded.
(6) Testing Tubes Picking Arm: To pick the testing tubes from the injection molding machine.
(7) Testing Tubes Collecting Station: The testing tubes receiving robot will drop the testing tubes here to be slided down to be sorted for box loading.
(8) Testing Tubes Sliding Tubes: To protect the testing tubes from scratching in dropping.
(9) Sensors: The sensors to check the availability of the testing tubes.
(10) Conveyor: Conveyor of the sorted testing tubes to be picked by the box loading robot.

To reduce the risk and cost of system purchasing, the best way is to have a turn-key solution of the laboratory consumable testing tubes which we'll ensure that the mold design is friendly to the automation system and maximize the productivity of the system. With a turn-key solutions, SWITEK will have the mold tested with the automation system to ensure that the system delivered is ready to work.