TOYO Machinery on Show All Electric Injection Molding Machine SI-230-7GS With Runma Robot at PlastImagen 2025

Turn-key IML Solutions

TOYO on show their new all electric injection molding machine SI-230-7GS with turn-key solutions of lock-box injection molding and have the box and lid picked by a Runma high speed 3 axis servo injection robot at PlastImagen 2025.

TOYO SI-230-7GS is the 7^th all electric injection molding machine with clamping force 2300kN and optional injection speed from 200mm/s ~ 500mm/s for the precise injection of thick wall parts or high speed injection of the thin-wall containers. The solution on show PlastImagen 2025 is a turn-key solution of Lock-Lock box which has the box and lid of the box integrated into one mold. The advantage of this design is that it will ensure the same parameters of box and lid injection and ensure a perfect match of them.

In the show of PlastImagen 2025 TOYO chose to have the box and lid picked with a Rumma high speed 3 axis servo injection robot. With a mold which integrated the box and lid the producer of the Lock-Lock and easily upgrad it to an automation system of which chan either stack the box and lids to have them packed in bundle or have the box and lid locked automatically and packed as one set.

The more rewarding investment would be to have the TOYO SI-230-7GS equipped with a G370F or FH400F injection unit to increase the injection speed of it up to 330/500 mm/s as a high speed all electric injection molding machine to work with SWITEK SW8 series high speed IML robot for the production of small size IML Yogurt cups. With an injection unit of FH400F the TOYO SI-230-7GS + SWITEK SW8 IML robot combination is possible to work in a total cycle time of around 5s, which would be a rewarding investment to the producer of the IML Yogurt cups.

All Electric Injection Molding Machine for Petri Dish Recommendation -- EM300-C1400H-B

HMD AllElectric Injection Molding Machine

EM300-C1400H-B

HMD EM300 -- HWAMDA High Speed All Electric Injection Molding Machine

No.	Name	Value
1	Clamping Force	3000 kN
2	Shot Weight	669 g
3	Shot Speed	167 mm/s
4	Screw Diameter	60 mm
5	Opening Stroke	610 mm
6	Space Between Tie Bars	730 x 730 mm
7	Mold Thickness (Min)	250 mm
8	Mold Thickness (Max)	680 mm
9	Pumper Motor	71 kW
10	Heating Capacity	0 kW

SWITEK BLOOD TUBES PACKING SOLUTIONS

About SWITEK Laboratory Consumable Testing Tubes Collecting Solutions

SWITEK laboratory consumable testing tubes collecting solutions is an integrated automation system of the laboratory consumable testing tubes injection molding which include the testing tubes picking robot, testing tubes sorting, collecting and have them loaded in plastic bags for vacuum and packing.

Parameters of SWITEK Testing Tubes Collecting System

Injection Molding Machine: 2500~4000kN High Speed Injection Molding Machine
Mold Layout Design: 32/48/64 Cavities
Injection Cycle Time: 8s
In Mold Time: 2s ±15%
Installation Dimension: 3000mm (L) x 2000mm (W) x 2200mm (H)

SWITEK Laboratory Consumable Testing Tubes Collecting System Functional Units

The detailed functional units of the testing tubes collecting sysstem:

(1) Box Loading Robot: Pick the sorted testing tubes and load them in the box.
(2) Testing Tubes Receiving Arm: Receive the testing tubes from the picking arm (6).
(3) & (5) Box Sliding Conveyor: Have the tubes collecting box moved to the right position to be loaded.
(6) Testing Tubes Picking Arm: To pick the testing tubes from the injection molding machine.
(7) Testing Tubes Collecting Station: The testing tubes receiving robot will drop the testing tubes here to be slided down to be sorted for box loading.
(8) Testing Tubes Sliding Tubes: To protect the testing tubes from scratching in dropping.
(9) Sensors: The sensors to check the availability of the testing tubes.
(10) Conveyor: Conveyor of the sorted testing tubes to be picked by the box loading robot.

To reduce the risk and cost of system purchasing, the best way is to have a turn-key solution of the laboratory consumable testing tubes which we'll ensure that the mold design is friendly to the automation system and maximize the productivity of the system. With a turn-key solutions, SWITEK will have the mold tested with the automation system to ensure that the system delivered is ready to work.