TopStar On Show TEII 360 with Turn-key Solutions of Cups at Chinaplas 2025

Turn-key IML Solutions

TopStar, the new comer of injection molding machine manufacturer from China, on showed their TEII360 hybrid injection molding machine with turn-key solution of 8 cavities cups high speed production at Chinaplas 2025.

The TEII series of injection molding machine is a new platform of which to be shared with All Electric injection molding for a clean production requirement or a Hybrid solution for an upgrading of hydraulic injection molding. For different products, TopStar provide different injection unit for an optimized injection process:

IU: Normal speed, long pressure holding, thick-wall products
IU h: Medium speed, thin-wall products
IU hs: High speed, ultra thin-wall products

It's obvious that TEII series of injection molding machine represent the cutting edge technology of TopStar to compete in the thin-wall high speed injection molding market, but will him win out from this fiercely competitive market? As we know that for the thin-wall containers high speed injection molding, HMD SP Series of high speed hydraulic is no doubt the top choice injection molding machine followed up by Yizumi P series and Haitian H/F series with a lot more smaller brands such as Golden Eagle, Lisong, PowerJet. The joining of TopStar will make the competition of the thin-wall containers injection molding machine even harsher.

Anyway, good at system integration and specialized in the cleanroom building, TopStar will have more opportunities than their competitor in the new projects of whole factory automation and will provider the new comers of thin-wall container producing more choice.

All Electric Injection Molding Machine for Petri Dish Recommendation -- P350E/1000B

Yizumi AllElectric Injection Molding Machine

P350E/1000B

P350E -- YIZUMI All Electric High Speed Injection Molding Machine and IML Application

No.	Name	Value
1	Clamping Force	3500 kN
2	Shot Weight	514 g
3	Shot Speed	500 mm/s
4	Screw Diameter	55 mm
5	Opening Stroke	700 mm
6	Space Between Tie Bars	730 x 730 mm
7	Mold Thickness (Min)	300 mm
8	Mold Thickness (Max)	750 mm
9	Pumper Motor	25 kW
10	Heating Capacity	26.5 kW

SWITEK BLOOD TUBES PACKING SOLUTIONS

About SWITEK Laboratory Consumable Testing Tubes Collecting Solutions

SWITEK laboratory consumable testing tubes collecting solutions is an integrated automation system of the laboratory consumable testing tubes injection molding which include the testing tubes picking robot, testing tubes sorting, collecting and have them loaded in plastic bags for vacuum and packing.

Parameters of SWITEK Testing Tubes Collecting System

Injection Molding Machine: 2500~4000kN High Speed Injection Molding Machine
Mold Layout Design: 32/48/64 Cavities
Injection Cycle Time: 8s
In Mold Time: 2s ±15%
Installation Dimension: 3000mm (L) x 2000mm (W) x 2200mm (H)

SWITEK Laboratory Consumable Testing Tubes Collecting System Functional Units

The detailed functional units of the testing tubes collecting sysstem:

(1) Box Loading Robot: Pick the sorted testing tubes and load them in the box.
(2) Testing Tubes Receiving Arm: Receive the testing tubes from the picking arm (6).
(3) & (5) Box Sliding Conveyor: Have the tubes collecting box moved to the right position to be loaded.
(6) Testing Tubes Picking Arm: To pick the testing tubes from the injection molding machine.
(7) Testing Tubes Collecting Station: The testing tubes receiving robot will drop the testing tubes here to be slided down to be sorted for box loading.
(8) Testing Tubes Sliding Tubes: To protect the testing tubes from scratching in dropping.
(9) Sensors: The sensors to check the availability of the testing tubes.
(10) Conveyor: Conveyor of the sorted testing tubes to be picked by the box loading robot.

To reduce the risk and cost of system purchasing, the best way is to have a turn-key solution of the laboratory consumable testing tubes which we'll ensure that the mold design is friendly to the automation system and maximize the productivity of the system. With a turn-key solutions, SWITEK will have the mold tested with the automation system to ensure that the system delivered is ready to work.