LS On Show the ONE 170E All Electric Injection Molding Machine at PlastImagen 2025 with YUDO Robot

Turn-key IML Solutions

PlastImagen 2025, the Korean all injection molding machine manufacturer LS Mtron on show their 170T all electrionic molding machine LS the ONE 170E with YODU high speed injection robot turn-key solution of injection molding.

The ONE -E series of injection molding machine is the all electric injection molding machine devision of LS Mtron aiming to improve satisfaction by broadening the range of choices through a diverse lineup with high-precision injection molding, exceptional reproducibility, delicate precision to deliver the value of differentiated products. And the toggle mechanism achieved through challenge and innovation realizing high-cycle performance.

As a small size all electric injection molding machine, the ONE 170E is best for the high speed production of the IML lids for dairy products containers cup like Yogurt cups or Ice Cream containers. It's also suitable for the IML production of IML Yogurt cups around 100ml with SWITEK SW8 series high speed side entry IML robot, which can expect a totla cycle time 2.1~5.5s with an in mold time 0.8~1.5s. It's one of the most rewarding investment of dairy package production.

All Electric Injection Molding Machine for Petri Dish Recommendation -- EM370-C1100-C

HMD AllElectric Injection Molding Machine

EM370-C1100-C

HMD EM370 -- HWAMDA High Speed All Electric Injection Molding Machine

No.	Name	Value
1	Clamping Force	3700 kN
2	Shot Weight	617 g
3	Shot Speed	164 mm/s
4	Screw Diameter	60 mm
5	Opening Stroke	730 mm
6	Space Between Tie Bars	830 x 830 mm
7	Mold Thickness (Min)	250 mm
8	Mold Thickness (Max)	720 mm
9	Pumper Motor	71 kW
10	Heating Capacity	0 kW

SWITEK BLOOD TUBES PACKING SOLUTIONS

About SWITEK Laboratory Consumable Testing Tubes Collecting Solutions

SWITEK laboratory consumable testing tubes collecting solutions is an integrated automation system of the laboratory consumable testing tubes injection molding which include the testing tubes picking robot, testing tubes sorting, collecting and have them loaded in plastic bags for vacuum and packing.

Parameters of SWITEK Testing Tubes Collecting System

Injection Molding Machine: 2500~4000kN High Speed Injection Molding Machine
Mold Layout Design: 32/48/64 Cavities
Injection Cycle Time: 8s
In Mold Time: 2s ±15%
Installation Dimension: 3000mm (L) x 2000mm (W) x 2200mm (H)

SWITEK Laboratory Consumable Testing Tubes Collecting System Functional Units

The detailed functional units of the testing tubes collecting sysstem:

(1) Box Loading Robot: Pick the sorted testing tubes and load them in the box.
(2) Testing Tubes Receiving Arm: Receive the testing tubes from the picking arm (6).
(3) & (5) Box Sliding Conveyor: Have the tubes collecting box moved to the right position to be loaded.
(6) Testing Tubes Picking Arm: To pick the testing tubes from the injection molding machine.
(7) Testing Tubes Collecting Station: The testing tubes receiving robot will drop the testing tubes here to be slided down to be sorted for box loading.
(8) Testing Tubes Sliding Tubes: To protect the testing tubes from scratching in dropping.
(9) Sensors: The sensors to check the availability of the testing tubes.
(10) Conveyor: Conveyor of the sorted testing tubes to be picked by the box loading robot.

To reduce the risk and cost of system purchasing, the best way is to have a turn-key solution of the laboratory consumable testing tubes which we'll ensure that the mold design is friendly to the automation system and maximize the productivity of the system. With a turn-key solutions, SWITEK will have the mold tested with the automation system to ensure that the system delivered is ready to work.