Injection Molding Machine for PVC Elbow Pipe Fittings -- SOUND UN300-EPIII Energy Saving Servo Injection Molding Machine

SOUND Servo Energy Saving injection molding machine

Pipe Fittings Injection Automation Solutions

UN300-EPIII -- Sound Energy-Saving Servo Injection Molding Machine

How to Prepare an Elbow PVC Pipe Fittings Injection Molding Project With Sound UN300-EPIII Injection Molding Machine?

The UN300-EPIII energy-saving servo injection molding machine is one of the best buy machine produced by ZheJiang Sound Machinery Manufacture Co., Ltd. established in 1955, one of the earliest producers of plastic injection molding machine in China. With a clamping force of 3000kN, UN300-EPIII energy-saving injection molding machine is one of the best choice for the project of 16 cavities φ21mm elbow PVC pipe fittings injection molding. As a 3^rd generation of high efficiency precision injection molding machine, the UN300-EPIII has below advantages:

Free choice of injection unit with a variety of screw type for different materials.
The new optimized 5-point dual toggle clamping unit for non-stop 24 x 7 high speed and high pressure working.
High efficiency servo driving technology ensures the productivity of the injection molding machine with a reduced cycle time.
Intelligent control system with seamless integration of the SPC quality control.

The Platen Dimension of Sound UN300-EPIII Energy Saving Servo Injection Molding Machine

Sound Energy Saving Servo injection molding machine

Unit: mm

What's the Working Process of PVC Elbow Pipe Fittings Injection Molding System?

The φ25mm elbow PVC pipe fittings is one of the largest quantity pipe fittings in a drainage system but easy produced. The production process of the PVC elbow include injection molding, robotic arm picking and runner cutting with air nipper. In planning of a PVC elbow pipe fittings injection molding system what to take is the selection of the injection molding machine with sufficient injection capacity and a robotic arm with sufficient payload.

How is 16 Cavities Elbow Pipe Fittings Injection Molding System Working?

In the video the PVC Elbow pipe fittings are picked by a SW6712S 3 axis servo robotic arm with the runner cut by a 4 air nippers pipe runner cutting system. It's an economic solution of PVC pipe fittings injection molding production. For more complex solutions of pipe fittings production please contact bloger for a turn-key soslution of PVC/PPR pipe fittings injection molding.

All Electric Injection Molding Machine for Petri Dish Recommendation -- BL350FE-A-E1100H

BOLE AllElectric Injection Molding Machine

BL350FE-A-E1100H

BL350FE-E1100H -- All Electric Injection Molding Machine for IML Thin-wall Container by China Injection Molding Machine Manufacturer BOLE Machinery

No.	Name	Value
1	Clamping Force	3500 kN
2	Shot Weight	465 g
3	Shot Speed	250 mm/s
4	Screw Diameter	50 mm
5	Opening Stroke	750 mm
6	Space Between Tie Bars	810 x 760 mm
7	Mold Thickness (Min)	240 mm
8	Mold Thickness (Max)	800 mm
9	Pumper Motor	156 kW
10	Heating Capacity	0 kW

SWITEK BLOOD TUBES PACKING SOLUTIONS

About SWITEK Laboratory Consumable Testing Tubes Collecting Solutions

SWITEK laboratory consumable testing tubes collecting solutions is an integrated automation system of the laboratory consumable testing tubes injection molding which include the testing tubes picking robot, testing tubes sorting, collecting and have them loaded in plastic bags for vacuum and packing.

Parameters of SWITEK Testing Tubes Collecting System

Injection Molding Machine: 2500~4000kN High Speed Injection Molding Machine
Mold Layout Design: 32/48/64 Cavities
Injection Cycle Time: 8s
In Mold Time: 2s ±15%
Installation Dimension: 3000mm (L) x 2000mm (W) x 2200mm (H)

SWITEK Laboratory Consumable Testing Tubes Collecting System Functional Units

The detailed functional units of the testing tubes collecting sysstem:

(1) Box Loading Robot: Pick the sorted testing tubes and load them in the box.
(2) Testing Tubes Receiving Arm: Receive the testing tubes from the picking arm (6).
(3) & (5) Box Sliding Conveyor: Have the tubes collecting box moved to the right position to be loaded.
(6) Testing Tubes Picking Arm: To pick the testing tubes from the injection molding machine.
(7) Testing Tubes Collecting Station: The testing tubes receiving robot will drop the testing tubes here to be slided down to be sorted for box loading.
(8) Testing Tubes Sliding Tubes: To protect the testing tubes from scratching in dropping.
(9) Sensors: The sensors to check the availability of the testing tubes.
(10) Conveyor: Conveyor of the sorted testing tubes to be picked by the box loading robot.

To reduce the risk and cost of system purchasing, the best way is to have a turn-key solution of the laboratory consumable testing tubes which we'll ensure that the mold design is friendly to the automation system and maximize the productivity of the system. With a turn-key solutions, SWITEK will have the mold tested with the automation system to ensure that the system delivered is ready to work.