Haitian On Show Turn-key Solutions of IML Shoehorn by MA1600 at PlastImagen 2025

Top Entry IML Solutions

Haitian, the wrold largest manufacturer of injection molding machine, on show their 5^th generation of high precision servo injection molding machine MA1600 with top entry IML solutions for the production of shoehorn with degradable plastic at PlastImagen 2025.

Details of MA1600

INJECTION UNIT		A	B	C
Screw diameter	mm	40	45	50
Screw L/D ratio	L/D	22.5	20	18
Injection volume (theoretical)	cm³	253	320	395
Injection weight (PS)	g	230	291	359
Injection Rate	g/s	111	141	174
Injection rate (ESG)	g/s	150	190	235
Injection Pressure	MPa	225	178	144
Plasticizing rate (GPPS)	g/s	17.0	22.6	28.4
Screw speed	rpm	0~215
CLAMPING UNIT
Clamping force	kN	1600
Mold opeing stroke	mm	430
Dist. between tie bars (H x V)	mm	470 x 470
Mold height max.	mm	520
Mold height min.	mm	180
Ejector stroke	mm	140
Ejector tonnage	kN	33

Tips for a Top Entry IML System with MA1600

As a small size injection molding machine, the size of the parts produced by MA1600 would be a small sized one, and the size of the robotic arms for the IML system would be limited. The suitable robotic arms would be the 3 axis servo injection robot SW6308S or SW7110S which has a payload of 3kg and vertical stroke 800~1000mm.
The height of the parts producable. Since the mold opening stroke of MA1600 is only 430mm, it's not suitable for the IML production of a plastic parts with a height (thickness) more than 140mm.
As a standard servo injection molding machine with an injection rate up to 235g/s, it's not suitable for the production of thin-wall containers like snack box, cups etc.
To ensure the success of an top entry IML system, please prepare the details of the injection molding machine, the 3D drawing of the mold (.stp/x_t) and the 3D drawing of the parts.

All Electric Injection Molding Machine for Petri Dish Recommendation -- ZE3000F/1400B

Zhafir AllElectric Injection Molding Machine

ZE3000F/1400B

ZE3000F/1400-- Zhafir All Electric Haitian High Speed Injection Molding Machine and IML Application

No.	Name	Value
1	Clamping Force	3000 kN
2	Shot Weight	0 g
3	Shot Speed	160 mm/s
4	Screw Diameter	60 mm
5	Opening Stroke	600 mm
6	Space Between Tie Bars	670 x 670 mm
7	Mold Thickness (Min)	250 mm
8	Mold Thickness (Max)	650 mm
9	Pumper Motor	168 kW
10	Heating Capacity	0 kW

SWITEK BLOOD TUBES PACKING SOLUTIONS

About SWITEK Laboratory Consumable Testing Tubes Collecting Solutions

SWITEK laboratory consumable testing tubes collecting solutions is an integrated automation system of the laboratory consumable testing tubes injection molding which include the testing tubes picking robot, testing tubes sorting, collecting and have them loaded in plastic bags for vacuum and packing.

Parameters of SWITEK Testing Tubes Collecting System

Injection Molding Machine: 2500~4000kN High Speed Injection Molding Machine
Mold Layout Design: 32/48/64 Cavities
Injection Cycle Time: 8s
In Mold Time: 2s ±15%
Installation Dimension: 3000mm (L) x 2000mm (W) x 2200mm (H)

SWITEK Laboratory Consumable Testing Tubes Collecting System Functional Units

The detailed functional units of the testing tubes collecting sysstem:

(1) Box Loading Robot: Pick the sorted testing tubes and load them in the box.
(2) Testing Tubes Receiving Arm: Receive the testing tubes from the picking arm (6).
(3) & (5) Box Sliding Conveyor: Have the tubes collecting box moved to the right position to be loaded.
(6) Testing Tubes Picking Arm: To pick the testing tubes from the injection molding machine.
(7) Testing Tubes Collecting Station: The testing tubes receiving robot will drop the testing tubes here to be slided down to be sorted for box loading.
(8) Testing Tubes Sliding Tubes: To protect the testing tubes from scratching in dropping.
(9) Sensors: The sensors to check the availability of the testing tubes.
(10) Conveyor: Conveyor of the sorted testing tubes to be picked by the box loading robot.

To reduce the risk and cost of system purchasing, the best way is to have a turn-key solution of the laboratory consumable testing tubes which we'll ensure that the mold design is friendly to the automation system and maximize the productivity of the system. With a turn-key solutions, SWITEK will have the mold tested with the automation system to ensure that the system delivered is ready to work.