Kronce on Show Turn-key Solutions of PET Injection Molding at Chinaplas2025

48 Cavities PET Preform Injection Automation Solution

KRONCE, the producer of injection molding machine specialized in the injection molding of PET products, on showed turn-key solution of PET box injection molding.

Starting from one/two cavities manual operation PET blowing system, Kronce Enterprice Development Co., Ltd. focus on the design & manufacturer of high speed PET preform injection molding system, high speed linear PET bottle blow molding system and high quality PET preform mold to provide clients with the turn-key solution of PET preform injection molding. The high lights of KRONCE PET Preform Injection Molding System include：

K-PET24-90A: which include 24 cavities PET preform injection mold, PET preform take-out robot with 72pcs of post cooling tubes for the production of PET preforms from 67g to 90g for water bottle of 3-5L with 48/41 bottle necks in an injection cycle time of 24s and output capacity up to 3600pcs/hour.
K-PET24-90B which include 24 cavities of PET preform mold, PET preform take-out robot with 72 pcs of post cooling tubes for the production of PET preform from 90g to 120g for 5L oil bottle with 45mm press type neck in 28 seconds injection cycle time with an output of 3085pcs/hour.
K-PET48A(35) which include 48 cavities PET preform injection mold, PET preform take-out robot with 144pcs of post cooling tubes for the production of standard PET preform <35g for the pure water bottle up to 1500ml at a cycle time of 7.5s and an output capacity up to 23000pcs/hour.
K-PET48B(46) which include 48 cavities PET preform injection mold, PET preform take-out robot with 144pcs of post cooling tubes for the production of standard PET preform <46g for the carbonated dring or pure water bottle up to 1500ml at a cycle time <7.5s and an output up to 23000pcs/hour.
K-PET48A(35) which is an enhanced model basedon K-PET48A(35) to have a 72 cavities of PET preform injectio mold, PET preform take-out robot with 216pcs of post cooling tubes for the production of standard PET preform <35g for pure water bottle up to 1500ml at a cycle time of 7.5s and an output up to 34000pcs/hour.

Other than solutions of PET preform injection molding, the products of KRONCE include the injection molding machine for PET products, high speed blow molding sytem of PET bottle, the standard blow molding system, cap compression system and PET preform injection mold to provide clients with a turn-key solutions of PET bottle.

All Electric Injection Molding Machine for Petri Dish Recommendation -- ZE3800F/1400HA

Zhafir AllElectric Injection Molding Machine

ZE3800F/1400HA

ZE3800F/1400-- Zhafir All Electric Haitian High Speed Injection Molding Machine and IML Application

No.	Name	Value
1	Clamping Force	3800 kN
2	Shot Weight	0 g
3	Shot Speed	350 mm/s
4	Screw Diameter	55 mm
5	Opening Stroke	700 mm
6	Space Between Tie Bars	770 x 770 mm
7	Mold Thickness (Min)	300 mm
8	Mold Thickness (Max)	710 mm
9	Pumper Motor	207 kW
10	Heating Capacity	0 kW

SWITEK BLOOD TUBES PACKING SOLUTIONS

About SWITEK Laboratory Consumable Testing Tubes Collecting Solutions

SWITEK laboratory consumable testing tubes collecting solutions is an integrated automation system of the laboratory consumable testing tubes injection molding which include the testing tubes picking robot, testing tubes sorting, collecting and have them loaded in plastic bags for vacuum and packing.

Parameters of SWITEK Testing Tubes Collecting System

Injection Molding Machine: 2500~4000kN High Speed Injection Molding Machine
Mold Layout Design: 32/48/64 Cavities
Injection Cycle Time: 8s
In Mold Time: 2s ±15%
Installation Dimension: 3000mm (L) x 2000mm (W) x 2200mm (H)

SWITEK Laboratory Consumable Testing Tubes Collecting System Functional Units

The detailed functional units of the testing tubes collecting sysstem:

(1) Box Loading Robot: Pick the sorted testing tubes and load them in the box.
(2) Testing Tubes Receiving Arm: Receive the testing tubes from the picking arm (6).
(3) & (5) Box Sliding Conveyor: Have the tubes collecting box moved to the right position to be loaded.
(6) Testing Tubes Picking Arm: To pick the testing tubes from the injection molding machine.
(7) Testing Tubes Collecting Station: The testing tubes receiving robot will drop the testing tubes here to be slided down to be sorted for box loading.
(8) Testing Tubes Sliding Tubes: To protect the testing tubes from scratching in dropping.
(9) Sensors: The sensors to check the availability of the testing tubes.
(10) Conveyor: Conveyor of the sorted testing tubes to be picked by the box loading robot.

To reduce the risk and cost of system purchasing, the best way is to have a turn-key solution of the laboratory consumable testing tubes which we'll ensure that the mold design is friendly to the automation system and maximize the productivity of the system. With a turn-key solutions, SWITEK will have the mold tested with the automation system to ensure that the system delivered is ready to work.