Roboplas put in market 2 cavities 2.5L pail IML robot with handle assembly integrated.

Roboplas put in market 2 cavities 2.5L pail IML robot with handle assembly integrated.

An IML bucket with a volumn around 2.5 litter is ideal as a food package such as biscuit, candy, chocolate and nuts etc. And with a handle it'll make it very convenient for it to be given as a seasonal gift, but the assembly of the handle is a boring and timing job. In this system Roboplas have the handle assembly function integrated into the system to solve the problem and increase the production efficiency of the system.

The counter part of this system is SWITEK two cavities bucket IML production with handle assembly which had been well installed in Russia and Australia for the production of IML buckets for dairy products. The advantages of SWITEK IML System compared to Roboplas is the cost and long term online technical support.

To start an IML bucket project with handle assembly, the best would be a turn-key solution with the IML robot and mould to be supplied together. Since the system will request the handle and the bucket to be in the same mould, it'll have more requirement about the mold and the IML system design. As a turn-eky solution SWITEK will have the IML robot co-tested with the mould to ensure the IML system delivered is a ready to work system to avoid any dispute possible for a system with the robot and mould purchased seperately.

YOU MAY ALSO BE INTERESTED