sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 358 |
| Shot weight | g | 261 |
| Shot speed | mm/s | 550 |
| Screw diameter | mm | 45 |
| Injection pressure | MPa | 240 |
| Screw L:D ratio | -- | 25 |
| CLAMPING UNIT | ||
| Clamping force | kN | 3500 |
| Opening Stroke | mm | 730 |
| Space between tie bars | mm x mm | 720 x 720 |
| Mold thickness(min) | mm | 350 |
| Mold thickness(max) | mm | 745 |
| Hydraulic ejection stroke | mm | 200 |
| Hydraulic ejection force | kN | 73 |
| POWER UNIT | ||
| Pump motor | kW | 110 |
| Heating capacity | kW | 15.7 |
| GENERAL | ||
| Oil tank capacity | L | 580 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 222 mm |
| B | 86 mm |
| C | 990 mm |
| D Max | 1648 mm |
| G | 2244 mm |
| M | 7038 mm |
| F Min | 1118 mm |
| S | 33 mm |
| SH | 1762 mm |
INJECTION MACHINERY NEWS
SWITEK Engineer Finished the Installation of New Magazines in Chile
SWITEK New IML System for 6 Cavities Cups with Metallic Label is Ready for Bulk Production
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
China IML System Proivder | Guang Dong Switke Technology Co., Ltd.
SWITEK new 2 cavities rectangular boxes 5 faces IML labeling top entry IML system installed for production.
SWITEK Automation Started Up Its Dual Heads Pipe Fittings In Mold Insertion System Custom Made for LESSO Group
SWITEK is In House Testing of Top Entry IML System for 20L Paint Buckets
New PVC Pipe Fittings Runner Cutting System Was Installed In the Factory of LESSO Group-- The World Largest Pipe Fittings Manufacturer
SWITEK New 4 cavities rectangular box with temper evidence side entry 5 faces IML solutions finished the in house testing before delivery.
SWITEK New 4 Cavities Rectangular Box Side Entry IML System Started Up for Production in India
Contact Blogger
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
