sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 442 |
| Shot weight | g | 402 |
| Shot speed | mm/s | 510 |
| Screw diameter | mm | 50 |
| Injection pressure | MPa | 195 |
| Screw L:D ratio | -- | 20 |
| CLAMPING UNIT | ||
| Clamping force | kN | 2800 |
| Opening Stroke | mm | 675 |
| Space between tie bars | mm x mm | 630 x 630 |
| Mold thickness(min) | mm | 330 |
| Mold thickness(max) | mm | 710 |
| Hydraulic ejection stroke | mm | 200 |
| Hydraulic ejection force | kN | 73 |
| POWER UNIT | ||
| Pump motor | kW | 101 |
| Heating capacity | kW | 14.8 |
| GENERAL | ||
| Oil tank capacity | L | 580 |
Platen Dimension
Machine Dimmension
| # | Value |
|---|---|
| A | 222 mm |
| B | 86 mm |
| C | 990 mm |
| D Max | 1648 mm |
| G | 2244 mm |
| M | 6673 mm |
| F Min | 1118 mm |
| S | 33 mm |
| SH | 1762 mm |
INJECTION MACHINERY NEWS
SWITEK Engineer Finished the Installation of New Magazines in Chile
SWITEK New Turn-key 2 Cavities Box IML Solution Finished In House Testing
SWITEK New 4 Cavities Burger King Twin-Cups Side Entry IML System Started Up
SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
SWITEK Automation Started Up Its Dual Heads Pipe Fittings In Mold Insertion System Custom Made for LESSO Group
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
SWITEK is In House Testing of Top Entry IML System for 20L Paint Buckets
SWITEK Automation New Icecream Cups Lids Auto-production Put in Use
The Assembly of SWITEK New IML Robot for Wrap + Bottom Labeling Finished
SWITEK Finished the Inhouse Testing of Turn-key 2 Cavities Lids IML Solutions
Contact Blogger
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
