sales06@switek.biz
+86 186 5927 5869
sales06@switek.biz
+86 186 5927 5869
| Description | Unit | Value |
|---|---|---|
| INJECTION UNIT | ||
| Shot volume | cm3 | 535 |
| Shot weight | g | 492 |
| Shot speed | mm/s | 550 |
| Screw diameter | mm | 55 |
| Injection pressure | MPa | 171 |
| Screw L:D ratio | -- | 24:1 |
| CLAMPING UNIT | ||
| Clamping force | kN | 4600 |
| Opening Stroke | mm | 660 |
| Space between tie bars | mm x mm | 750 x 650 |
| Mold thickness(min) | mm | 350 |
| Mold thickness(max) | mm | 750 |
| Hydraulic ejection stroke | mm | 150 |
| Hydraulic ejection force | kN | 77 |
| POWER UNIT | ||
| Pump motor | kW | 102 |
| Heating capacity | kW | 24 |
| GENERAL | ||
| Oil tank capacity | L | 800 |
Platen Dimension
Machine Dimmension
INJECTION MACHINERY NEWS
SWITEK Automation New 4 Cavities Pipe Strap Nuts In Mold Insertion Automation Solutions for LESSO Group Put in USE.
The Assembly of SWITEK New IML Robot for Wrap + Bottom Labeling Finished
SWITEK New IML Robot for Multi-Cavities Containers is Under Going In House Testing
SWITEK Automation Started Up Its Dual Heads Pipe Fittings In Mold Insertion System Custom Made for LESSO Group
SWITEK New IML System for Bucket with Handle Assembly Started Up for Bulk Production
SWITEK 2 Cavities IML Robot for 10L Bucket is Ready for Testing
SWITEK is In House Testing of Top Entry IML System for 20L Paint Buckets
SWITEK New 4 cavities rectangular box with temper evidence side entry 5 faces IML solutions finished the in house testing before delivery.
SWITEK Engineer Finished the Installation of New Magazines in Chile
SWITEK Finished the Inhouse Testing of Turn-key 2 Cavities Lids IML Solutions
Contact Blogger
sales06@switek.biz
+86 186 5927 5869
DongGuan, GuangDong, China
